Inspecting quality content confirming it's safe! For the best results, it is preferred that we inspect the content of this blog  with a program called "Microsoft word". We realize that no house or blog is perfect, but that is why we go through ours  with the intent of it being perfect! Give us a call  or send us an E-Mail at:

Home inspector news

Saturday, February 18, 2012

Home inspector news

What’s the best way to “winterize” my home?

The most destructive element to a home’s structural health is moisture infiltration through openings in the building envelope. Water is insidious in its efforts to find even the smallest crack and attack any and all cellulose materials, which includes the both exterior and interior coverings including the structural framing members — often resulting in “dry rot” (a misleading term because continual moisture contact with wood usually results in “wet rot” which is the breakdown of cellulose materials).

Our Folsom Home Inspection team can tell you that another area is of concern when dealing with moisture infiltration is pest infestation — the invasion of wood destroying insects, carpenter ants and wood eating beetles that thrive on cellulose materials. And of course, moisture problems can also lead to mold.

If your home has inadequate grade slope away from the perimeter foundation, there may be the possibility of water intrusion into the foundation’s crawl space area, which can be compounded if the home contains below grade rooms and storage areas.

The most common means of moisture intrusion noted by home inspectors in California are through the following avenues: gaining entry below the structure; worn roof coverings; deteriorated roof vent flashing serving both plumbing fixtures and mechanical equipment; improperly installed or worn chimney flashing; and doors and windows that have not been properly weather sealed.

Below is a simple list of Home inspector and inspection maintenance tasks for the homeowner to perform to help prevent moisture infiltration both into and below their homes:

Home Inspection 1. Clean all rain gutters, including downspouts, and make sure all gutter joints are properly sealed.

Home Inspection 2. Insure that rain gutter downspouts are directed away from the perimeter foundation. This may take adding some corrugated plastic extension piping you can purchase at your local home store.

Home Inspection 3. Check to see there are no low areas around the home’s perimeter foundation where water can collect after a rainstorm. Standing water will eventually work its way beneath the home and can lead to building settlement and foundation support failure.

Home Inspection 4. Carefully check all of your exterior doors and windows and adjacent trim to see if they need any application of exterior type epoxy or sealants.

Home Inspection 5. Immediately after the first heavy rain, check under your house to confirm that the ground is reasonably dry.

Home Inspection 6. If you think the surface grade around the perimeter foundation is a source for concern and more than you can fix with a garden shovel, consult a state licensed drainage contractor for their recommendations – they will provide a cost estimate for corrective work which may include the installation of an underground drainage system.